Using VerticalLayout in Feathers containers (Starling version)
VerticalLayout class may be used by components that support layout, such as
ScrollContainer, to display items from top to bottom in a single column. It supports a number of useful options for adjusting the spacing and alignment.
First, let's create a
VerticalLayout and pass it to a
var layout:VerticalLayout = new VerticalLayout(); var container:LayoutGroup = new LayoutGroup(); container.layout = layout; this.addChild( container );
There are a number of simple properties that may be used to affect positioning and sizing of items in the layout. Let's look at some of the most common.
The padding is the space around the edges of the container. Let's set the
padding property to
layout.padding = 12;
If needed, the padding on each side of the container may be set separately. Below, we set the
10 pixels, and we set the
layout.paddingTop = 10; layout.paddingRight = 15; layout.paddingBottom = 10; layout.paddingLeft = 15;
The gap is the space between items. Let's set the
gap property to
layout.gap = 5;
We can align the items in the layout using the
verticalAlign properties. Vertical alignment may be used only when the total height of the content (including padding and gap values) is less than or equal to the height of the container that uses the layout. Let's adjust the alignments so that the content will be aligned to the horizontal center and vertical middle:
layout.horizontalAlign = HorizontalAlign.CENTER; layout.verticalAlign = VerticalAlign.MIDDLE;
horizontalAlignproperty has a special value, named
HorizontalAlign.JUSTIFY. When it is used, the width of all items in the layout is adjusted to fill the full width of the container.
We can pass
VerticalLayoutData to a component's
layoutData property to specify the width or height using a percentage value. In the simplest, very common case, this is a percentage of the parent container's width or height.
In the following example, we add two buttons to a container using
VerticalLayout. The first button takes up 25% of the container's height, and the second button takes up 75% of the container's height:
var button1:Button = new Button(); button1.label = "1"; var button1LayoutData:VerticalLayoutData = new VerticalLayoutData(); button1LayoutData.percentHeight = 25; button1.layoutData = button1LayoutData; container.addChild(button1); var button2:Button = new Button(); button2.label = "2"; var button2LayoutData:VerticalLayoutData = new VerticalLayoutData(); button2LayoutData.percentHeight = 75; button2.layoutData = button2LayoutData; container.addChild(button2);
If there are other children in the container with fixed pixel heights,
percentHeight will be based on the remaining space in the parent container after the fixed pixel height is subtracted from the container's height.
In the following example, we have two buttons again, but this time, the first button is a fixed 300 pixels high. Now, the percentages are based on the height of the container minus 300 pixels. We want the second button to simply fill the remaining vertical space in the container, so we set
var button1:Button = new Button(); button1.label = "1"; button1.height = 300; container.addChild(button1); var button2:Button = new Button(); button2.label = "2"; var button2LayoutData:VerticalLayoutData = new VerticalLayoutData(); button2LayoutData.percentHeight = 100; button2.layoutData = button2LayoutData; container.addChild(button2);
Because the first button's height is 300 pixels, and not a percentage, the second button's height won't be equal to the height of the container, even though
percentHeight is equal to
100. Percentages are always calculated after fixed values in pixels are accounted for.
We can also set
percentWidth to fill a percentage of the container's width. For
VerticalLayout, since the children are positioned one after the other from the top to bottom, there are never fixed values to account for horizontally.
Let's use the same height values from the previous example, but we'll specify 100% width on the first button:
var button1:Button = new Button(); button1.label = "1"; button1.height = 300; var button1LayoutData:VerticalLayoutData = new VerticalLayoutData(); button1LayoutData.percentWidth = 100; button1.layoutData = button1LayoutData; container.addChild(button1); var button2:Button = new Button(); button2.label = "2"; var button2LayoutData:VerticalLayoutData = new VerticalLayoutData(); button2LayoutData.percentHeight = 100; button2.layoutData = button2LayoutData; container.addChild(button2);
Notice that we can mix and match fixed pixel values with percentage values on the same child. The height of the first button is still 300 pixels, but the width is 100%.
As a shortcut, we can optionally specify both
percentHeight in the
new VerticalLayoutData( 100, 50 ); //width: 100%, height: 50%
NaN may be used to say that we do not want to use percentage dimensions. For instance, if we wanted a button that is 100% width and 300 pixels high, like in the earlier example, we might do it like this:
button1.height = 300; button1.layoutData = new VerticalLayoutData( 100, NaN );
Percentage dimensions always take precedence, so if we were to pass a numeric value instead of
NaN as the second parameter of the constructor, then the fixed height of 300 pixels would be ignored.
Virtual Vertical Layout
GroupedList, the layout may be virtualized, meaning that some items in the layout will not actually exist if they are not visible. This helps to improve performance of a scrolling list because only a limited number of item renderers will be created at any given moment. If the list's data provider is very large, a virtual layout is essential, even on desktop computers that have incredible processing power compared to mobile devices.
A virtualized layout will need as estimate about how big a "virtual" item renderer should be. We should set the
typicalItem property of the list to have it determine the typical width and height of an item renderer to use as this estimated value. If we don't pass in a typical item, the first item in the data provider is used for this estimate.
true for containers that support it. We can disable virtual layouts by setting it to
false. When a layout is not virtualized, every single item renderer must be created by the component. If a list has thousands of items, this means that thousands of item renderers need to be created. This can lead to significant performance issues, especially on mobile. In general,
useVirtualLayout should rarely be disabled.
layout.useVirtualLayout = false;
ScrollContainer components never use virtual layouts.
Variable Item Dimensions in a Virtual Vertical Layout
By default, a virtualized vertical layout will assume that all items will have the same height. This restriction helps improve performance, and most lists won't need items with variable heights. However, we can set the
hasVariableItemDimensions property to
true, if we need our list's item renderers to have different height values. When we do this, the typical item height is used as an estimated height for virtual item renderers, and the real height value for each item renderer is stored as it comes into view, improving the accuracy of the layout over time.
layout.hasVariableItemDimensions = false;